Omron SYSDRIVE 3G3RV, User Manual

Page: 94 / 446

3
-2
Digital Operator
This
section describes the displays and functions of the Digital Operator.
K K K K
Digital Operator Display
The
key names and functions of the Digital Operator are described below.
Fig 3.1 Digital Operator Component Names and Functions
FWD
DRIVE QUICK ADV VERIFY AUTO
TUNING
REV SEQ REF ALARM
DIGITAL OPERATOR PJVOP161
L O C A L
REMOTE
FWD
REV
MENU ESC
JOG
RUN STOP
RESET
DIGITAL OPERATOR PJVOP160
PRGM
REMOTE
FWD REV SEQ REF ALARM
REMOTE
L O C A L
REMOTE
FWD
REV
MENU ESC
JOG
RUN STOP
RESET
Drive Mode Indicators
FWD: Lit when there is a forward run command input.
REV: Lit when there is a reverse run command input.
SEQ: Lit when the run command from the control circuit ter-
minal is enabled.
REF: Lit when the frequency reference from control circuit
terminals A1 and A2 is enabled.
ALARM: Lit when an error or alarm has occurred.
Data Display
Displays monitor data, parameter numbers, and
settings (in five digits).
Mode Display
DRIVE:
Lit in Drive Mode.
QUICK: Lit in Quick Programming Mode.
ADV:
Lit in Advanced Programming Mode.
VERIFY: Lit in Verify Mode.
A. TUNE:Lit in Autotuning Mode.
Keys
Execute operations such as setting parameters,
monitoring, jogging, and autotuning.
Digital Operator with LED Display (3G3IV-PJVOP161)
Digital Operator with LCD Display (3G3IV-PJVOP160)
Drive Mode Indicators
FWD: Lit when there is a forward run command input.
REV: Lit when there is a reverse run command input.
SEQ: Lit when the run command from the control circuit ter-
minal is enabled.
REF: Lit when the frequency reference from control circuit
terminals A1 and A2 is enabled.
ALARM: Lit when an error or alarm has occurred.
Data Display
Displays monitor data, parameter numbers, and
settings.
Keys
Execute operations such as setting parameters,
monitoring, jogging, and autotuning.