Omron SYSDRIVE 3G3RV, User Manual, Page: 441 / 446

10
-18
* 1. Not
initialized. (Japanese standard specifications: A1-01 = 1, A1-02 = 2)
* 2. The
factory setting will change if the control method is changed. The factory settings given above are for V/f with PG control.
* 3. Factory
setting depends on the control method (A1-02).
* 4. For
V/f with PG control: 1.0
* 5. For
Inverters with a capacity of 55 kW or more: 2.00
* 6. Setting
range and initial setting depend on Inverter capacity.
* 7. Setting
for 200-V class Inverters. For 400-V class Inverters, double the value.
* 8. Factory
setting in the parentheses is for 3-wire sequence.
* 9. The
contents is ignored if the setting is 0.0.
* 10.E1-13
will have the same value as E1-05 after autotuning.
* 11.If
the set value is 0, acceleration will be to the speeds for the acceleration times (C1-01 to C1-08)
* 12.The
setting range is 10% to 200% of the Inverter rated output. (The value given is for a 200-V class Inverter for 0.4 kW.)
o2-10 Fan
operation time setting
0 T1-02 Motor
output power
0.40
o2-12
Fault
trace/fault history initializa-
tion
0 T1-03 Motor
rated voltage
200.0
*7
o3-01 Copy
function selection
0 T1-04 Motor
rated current
1.90
*6
o3-02 Read
permitted selection
0 T1-05 Motor
base frequency
60.00
T1-00 Motor
1/2 selection
1 T1-06 Number
of motor poles
4
T1-01 Autotuning
mode selection
0 T1-07 Motor
base speed
1750
Table 10.1 Parameters (Continued)
No. Name
Fac-
tory
Setting
Set-
ting
No. Name
Fac-
tory
Setting
Set-
ting