Omron SYSDRIVE 3G3RV, User Manual

Page: 34 / 446

1
-20
n
Removing the Front Cover
Press
the left and right sides of the front cover in the directions of arrows 1 and lift the bottom of the cover in
the
direction of arrow 2 to remove the front cover as shown in the following illustration.
Fig 1.16 Removing the Front Cover (3G3RV-A4055 Shown Above)
n
Mounting the Front Cover
After
wiring the terminals, mount the front cover to the Inverter by performing in reverse order the steps to
remove
the front cover.
1. Do
not mount the front cover with the Digital Operator attached to the front cover; otherwise, the Digital
Operator
may malfunction due to imperfect contact.
2. Insert
the tab of the upper part of the front cover into the groove of the Inverter and press the lower part of
the
front cover onto the Inverter until the front cover snaps shut.
n
Mounting the Digital Operator
After
attaching the terminal cover, mount the Digital Operator onto the Inverter using the following procedure.
1. Hook
the Digital Operator at A (two locations) on the front cover in the direction of arrow 1 as shown in
the
following illustration.
2. Press
the Digital Operator in the direction of arrow 2 until it snaps in place at B (two locations).
Fig 1.17 Mounting the Digital Operator
A
B
1
2