Omron SYSDRIVE 3G3RV, User Manual, Page: 99 / 446

Modes
3-
7
K K K K
Drive Mode
Drive
Mode is the mode in which the Inverter can be operated. The following monitor displays are possible in
Drive
Mode: The frequency reference, output frequency, output current, and output voltage, as well as fault
information
and the fault history.
When
b1-01 (Reference selection) is set to 0, the frequency can be changed from the frequency setting display.
Use
the Increment, Decrement, and Digit Selection/RESET Keys to change the frequency. The parameter will
be
written and the monitor display will be returned to when the ENTER Key is pressed after changing the set-
ting.
n
Example Operations
Key
operations in Drive Mode are shown in the following figure.
Fig 3.4 Operations in Drive Mode (Example for the 3G3IV-PJVOP161)
IMPORTANT
The display for the first monitor parameter (frequency reference) will be displayed when power is turned ON.
The monitor item displayed at startup can be set in o1-02 (Monitor Selection after Power Up).
Operation cannot be started from the Mode Selection Display.
Mode Selection Display Monitor Constant Display
Power ON MENU
Drive Mode
DRIVE QUICK VERIFY ADV
Detailed Monitor Constant
Display Monitor Display
ESC ESC
Status Monitor
Error Trace
Fault History
ESC
Frequency reference
RESET
Fan operating time
ESC
ESC
ESC
RESET
ESC
ESC
ESC
RESET
ESC
ESC
ESC
ESC
ESC
ESC
ESC
ESC
Current error
Operating time at error
1st previous error
ESC
ESC
Frequency reference
Frequency reference setting/
display unit o1-03
Output frequency
Output current
Monitor setting for o1-01
VERIFY ADV DRIVE QUICK VERIFY ADV DRIVE QUICK
Operating time at 4th
previous error
AUTO
TUNING
AUTO
TUNING
AUTO
TUNING