Omron SYSDRIVE 3G3RV, User Manual

Page: 73 / 446

Wiring Control Circuit Terminals for European Models
2-
37
Wiring Control Circuit Terminals for European
Models
K
K K
K
Wire Sizes and Closed-loop Connectors
For
remote operation using analog signals, keep the control line length between the Digital Operator or opera-
tion
signals and the Inverter to 50 m or less, and separate the lines from high-power lines (main circuits or
relay
sequence circuits) to reduce induction from peripheral devices.
When
setting frequencies from an external frequency setter (and not from a Digital Operator), use shielded
twisted-pair
wires and ground the shield to terminal E (G), as shown in the following diagram.
Fig 2.27
Terminal
numbers and wire sizes are shown in Table 2.19.
* 1. Use
shielded twisted-pair cables to input an external frequency reference.
* 2. Refer
to Table 2.9 Close-loop Connector Sizes (JIS C2805) (200-V class and 400-V class) for suitable closed-loop crimp terminal sizes for the wires.
* 3. We
recommend using straight solderless terminal on signal lines to simplify wiring and improve reliability.
Table 2.19 Terminal Numbers and Wire Sizes [For European (-E) Models]
Terminals
Termi-
nal
Screws
Tightening
Torque
(N•m)
Possible
Wire Sizes
mm
2
(AWG)
Recom-
mended
Wire Size
mm
2
(AWG)
Wire Type
S1,
S2, S3, S4, S5, S6, S7,
FM,
AC, AM, IG, S+, S-,
SN,
SC, SP, A1, A2, +V, -V,
MP,
RP, R+, R-, M3, M4,
M1,
M2, M5, M6, MA,
MB,
MC
Phoenix
type
0.5
to 0.6
0.14
to 1.5 *3
(26
to 16)
0.75
(18)
• Shielded,
twisted-pair wire *1
• Shielded,
polyethylene-cov-
ered,
vinyl sheath cable
(KPEV-S
by Hitachi Electrical
Wire
or equivalent)
E
(G)
M3.5 0.8
to 1.0
0.5
to 2 *2
(20
to 14)
1.25
(12)
External
frequency
reference
0 to +10 V
4 to 20 mA
Shield terminal
Speed setting power supply, +15 V 20 mA
Master speed reference, 0 to 10 V (20 k
Ω
)
Master speed reference, 4 to 20 mA (250
Ω
)/0 to +10 V (20
Ω
)
Pulse input, 33 kHz max.
E (G)