Omron SYSDRIVE 3G3RV, User Manual

Page: 275 / 446

Continuing Operation
6-
59
n
Auto Restart External Outputs
To
output auto restart signals externally, set H2-01 to H2-03 (multi-function output terminals M1-M2, M3-
M4,
M5-M6, P1-PC, and P2-PC function selection) to 1E (auto restart).
n
Related Parameters
n
Application Precautions
•
The
number of auto restarts count is reset under the following conditions:
After
auto restart, normal operation has continued for 10 minutes.
After
the protection operation has been performed, and the error has been verified, and an error reset
has
been input.
After
the power supply is turned OFF, and then ON again.
•
Do
not use the auto restart function with variable loads.
Param-
eter
Num-
ber
Name
Description
Setting
Range
Factory
Setting
Change
during
Opera-
tion
Control Methods
V/f
V/f
with
PG
Open
Loop
Vec-
tor
LCD Display
L5-01
Number
of auto restart
attempts
Set
the number of auto restarts attempts.
Automatically
restarts after a fault and conducts a
speed
search from the run frequency.
0
to 10
0 No A A A
Num
of Restarts
L5-02
Auto
restart operation
selection
Sets
whether a fault contact output is activated
during
fault restart.
0:
Not output (Fault contact is not activated.)
1:
Output (Fault contact is activated.)
0
or 1
0 No A A A
Restart
Sel