Omron SYSDRIVE 3G3RV, User Manual

Page: 416 / 446

9
-22
n
Input Noise Filters for EMC Directives (3G3RV-PFS
@
@ @
@
, by Schaffner)
When
conformance to the EMC Directives in the EC Directives is required, always use one of these Filters.
The
Filter is connected between the Inverter’s power supply input terminals (R/L1, S/L2, T/L3) and the power
supply.
There
are holes for mounting the Noise Filters to Inverters on the top of the Noise Filters. Use these holes to
secure
the Noise Filters to the Inverters.
Models and Application
The
standard models of Input Noise Filters for EMC Directives are listed in the following table.
Wiring Example
A
wiring example for an Input Noise Filter for EMC Directives is shown below.
Inverter Input Noise Filter for EMC Directives
Voltage Class
Max. Applicable
Motor Capacity (kW)
Rated Cur-
rent (A)
Model No.
Weight
(kg)
Dimensions
Diagram
3-phase,
200 VAC
0.4
10 3G3RV-PFS5972-10-07 1.1
1
0.75
1.5
2.2
18 3G3RV-PFS5972-18-07 1.3
3.7
35 3G3RV-PFS5973-35-07 1.4
5.5
7.5
60 3G3RV-PFS5973-60-07 3 2
11
15
100 3G3RV-PFS5973-100-07 4.9 3
18.5
22
130 3G3RV-PFS5973-130-35 4.3 5
30
37
160 3G3RV-PFS5973-160-40 6 6
45
240 3G3RV-PFS5973-240-37 11 7
55
3-phase,
400 VAC
0.4
10 3G3RV-PFS5972-10-07 1.1
1
0.75
1.5
2.2
3.7
18 3G3RV-PFS5972-18-07 1.3 4.0
5.5
7.5
35 3G3RV-PFS5972-35-07 2.1 2
11
15
60 3G3RV-PFS5972-60-07 4 3
18.5
22
70 3G3RV-PFS5972-70-52 3.4 4
30
37
130 3G3RV-PFS5972-130-35 4.7 5 45
55
3-phase 200 VAC
Single-phase 200 VAC
3-phase 400 VAC
MCCB
Noise filter
Inverter
Clamp core