Omron SYSDRIVE 3G3RV, User Manual

Page: 18 / 446

1
-4
Differences by Model
The
RV-series products differ in specifications by model. This section explains the differences.
K K K K
Differences in Hardware
For
details, refer to Chapter 3 The Digital Operator and Chapter 2 Wiring.
Note Abbreviations
in the table have the following meanings.
SPDT:
Single-pole Double-throw
SPST-N.O.:
Single-pole Single-throw with Normally Open Contact
K
K K
K
Differences in Software (Function, Factory Setting, and Setting Range)
Refer
to Chapter 5 Parameters for details.
Table 1.3 Differences in Hardware
Asia
Europe
(suffixed -E)
Digital
Operator
LED
type attached
(LCD
type is sold separately.)
LED
type: 3G3IV-PJVOP161
LCD
type: 3G3IV-PJVOP160
LED
type attached
(LCD
type is sold separately.)
LED
type: 3G3IV-PJVOP161
LCD
type: 3G3IV-PJVOP160
Digital
outputs
Multi-function
output 1
P1-PC
Transistor
output
M3-M4
Relay
contact output
(SPST-N.O.)
Multi-function
output 2
P2-PC
Transistor
output
M5-M6
Relay
contact output
(SPST-N.O.)
Analog
Input A1
Unsigned
10 bits
0
V to +10 V
Unsigned
12 bits
-10
V to 10 V
Control
Circuit Terminal Block
M3.5
screw terminal
Phoenix
type
Table 1.4 Differences in Software
Name Parameter Number Asia
Europe
suffixed -E
Prohibition
of reverse
operation
b1-04
Setting
range: 0 or 1
0:
Reverse enabled
1:
Reverse disabled
Setting
range: 0 to2
0:
Reverse enabled
1:
Reverse disabled
2:
Phase order changed
(Only for V/f control)
DC
injection braking
time
at stop
b2-04
Factory
setting
0.50
s
Factory
setting
0.00
s
Timer
function ON/
OFF-delay
time
b4-01
b4-02 Setting
range
0.0
to 300.0 s
Setting
range
0.0
to 3000.0 s
PID
set point setting
b5-18
b5-19
Disabled Enable
the PID set point setting
c
a
b