Omron SYSDRIVE 3G3RV, User Manual

Page: 112 / 446

4
-6
K K K K
Initializing Parameters
Initialize
parameters by following the table below. Set A1-03 to 2220 when initializing a 2-wire sequence.
Table 4.1 Initializing Parameters
Step Key Operator Screen Displays Description
1 Turn
ON the power.
2
Press
to shift to Advanced Programming
Mode.
3 Press
to show parameter reference screen.
4 Press
to confirm A1.
5 Press
three times to display A1-03 (initialize).
6
Press
to show the set value for the initializing
method.
7 Use
to change the set value to “2220.”
8 Press
to execute the initialization.
9
When
the initializing is completed, the “End”
indication
appears, and the display returns to
the
parameter reference screen.
MENU
RESET