Omron SYSDRIVE 3G3RV, User Manual, Page: 212 / 446

5
-86
Note Attach
a Momentary Power Interruption Compensation Unit if compensation for power interruptions of up to 2.0 seconds is required for 200-V class
Inverters
with outputs of 0.4 to 11 kW.
* If
C6-02 is set to 0, 1, or F and the initial value of C6-03 and C6-04 is 2.0 kHz, the initial settings for C6-02 are as follows: 2: 5.0 kHz, 3: 8.0 kHz, 4: 10
kHz,
5: 12.5 kHz, and 6: 15 kHz. If the carrier frequency is set higher than the factory setting for Inverters with outputs of 7.5 kW or more, the Inverter
rated
current will need to be reduced.
Parame-
ter Num-
ber
Name Unit Factory Setting
- Inverter Capacity kW 18.5 22 30 37 45 55 75 90 110
o2-04 kVA selection - 9 A B C D E F 10 11
b8-03
Energy-saving
filter time
constant
s 0.50
(Open loop vector control)
2.00
(Open loop vector control)
b8-04
Energy-saving
coeffi-
cient
-
57.87 51.79 46.27 38.16 35.78 31.35 23.10 23.10 23.10
C6-02
Carrier
frequency selec-
tion
*
- 6 6 4 3 3 3 3 3 1
-
Carrier
frequency selec-
tion
upper limit
- 6 6 6 4 4 4 4 4 1
E2-01
(E4-01)
Motor
rated current
A
65.8 77.2 105.0 131.0 160.0 190.0 260.0 260.0 260.0
E2-02
(E4-02)
Motor
rated slip
Hz 1.67 1.70 1.80 1.33 1.60 1.43 1.39 1.39 1.39
E2-03
(E4-03)
Motor
no-load current
A 15.7 18.5 21.9 38.2 44.0 45.6 72.0 72.0 72.0
E2-05
(E4-05)
Motor
line-to-line resis-
tance
Ω
0.101 0.079 0.064 0.039 0.030 0.022 0.023 0.023 0.023
E2-06
(E4-06)
Motor
leak inductance
% 20.1 19.5 20.8 18.8 20.2 20.5 20.0 20.0 20.0
E2-10
Motor
iron loss for
torque
compensation
W
505 538 699 823 852 960 1200 1200 1200
L2-02
Momentary
power loss
ridethru
time
s 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0
L2-03
Min.
baseblock (BB)
time
s 1.0 1.0 1.1 1.1 1.2 1.2 1.3 1.5 1.7
L2-04 Voltage
recovery time
s 0.6 0.6 0.6 0.6 0.6 1.0 1.0 1.0 1.0
L8-02 Overheat
pre-alarm level °
C 100 90 90 95 100 105 95 100 95