Omron FQ2-S/CH Series, User Manual, Page: 575 / 590

Updating the Software FQ2-S/CH User’s Manual
573
Appe
ndi
ce
s
9
9-4 Updating the Software
FQ2-S1 FQ2-S2 FQ2-S3 FQ2-S4 FQ2-CH
The most recent version of the software and PC Tool can be downloaded from the following website for
OMRON members. Refer to the
Member Registration Sheet that is enclosed with the Sensor.
http://www.omron-cxone.com/vison_sys
After you download the software, use the following procedure to update.
When you update the software, always update the software for the Touch Finder or PC Tool first, and then
update the software for the Sensor.
Step 1 Update the software for the PC Tool or Touch Finder.
• Update the PC Tool
Install the PC Tool that was downloaded.
• Update the software for the Touch Finder
1
Place the update file that you obtained directly in the root folder of an SD card.
2
Insert the SD card into the Touch Finder.
3
Press (Setup Mode or Run Mode)
−
[TF settings]
−
[Update].
Step 2 Update the software for the Sensor.
• Updating from the PC Tool
1
Store the update file you obtained in the following directory.
\\....\My Documents\OMRON FQ\SDCard\UPDATE\SENSOR
2
To update the software in the Sensor, press (Setup Mode)
−
[Sensor settings]
−
[Update].
• Updating from the Touch Finder
1
Place the update file that you obtained directly in the root folder of the SD card.
2
Insert an SD card into the Touch Finder.
3
To update the software in the Sensor, press (Setup Mode) − [Sensor settings] − [Update].
The software will be updated automatically.
Do not turn OFF the power supply until updating the software has been completed.
The Sensor or Touch Finder may not start normally if power is turned OFF during the update.
Important