Omron FQ2-S/CH Series, User Manual, Page: 50 / 590

Installation
48
FQ2-S/CH User’s Manual
Mounting to a Control Panel
The Touch Finder can be mounted on a panel using the FQ-XPM Panel Mounting Adapter.
• Always turn OFF the Touch Finder power before attaching or detaching the Panel Mount Adapter.
Attaching or detaching with the power turned ON may cause a failure.
Installation Procedure
1
Set the Touch Finder in the Panel Mount
Adapter.
2
Press the slider up on the Touch Finder.
3
Create holes in the panel for mounting.
Refer to the following page for hole dimensions.
Dimensions: p.562
4
Connect the cable to the Touch Finder.
5
Mount the Touch Finder with the Panel Mount
Adapter from the front of the panel.
6
Hook the hooks on the Mounting Bracket in
the four holes of the Panel Mount Adapter and
secure them with screws.
(Tightening torque: 1.2 N·m)
7
Check that the Touch Finder is attached prop-
erly to the Panel.
Important
Mounting
Bracket