Omron FQ2-S/CH Series, User Manual, Page: 159 / 590

Reading with OCR FQ2-S/CH User’s Manual
157
4
Setting Up Inspect
ions
•
When loading Scene data from an older version, the [Legacy Mode] Setting appears above the measurement
parameters.
The [Legacy Mode] allows for Scene data, or Dictionary data created with software versions older than ver.
2.10 to be usable with ver. 2.02, or later software. The Dictionary data created with the old software version can
only be used with Scene data also created from the old software version.
If you touch [Legacy Mode], which is above the measurement parameters, the following dialog appears.
Touching [Yes] will update the settings to version 2.10, or later.
Use Dictionary data with Scene data created with the same Sensor version. In [Legacy Mode] use only
Dictionary data created with Sensor version older than ver. 2.02. Likewise, with Sensor version 2.10 or later,
use Dictionary data created in Sensor version 2.10, or later. The following dialog will appear if there is a version
mismatch.
Important