![background image](http://html1.mh-extra.com/html/omron/fq2-s-ch-series/fq2-s-ch-series_user-manual_742878152.webp)
Reading with OCR
150
FQ2-S/CH User’s Manual
6
Repeat the above procedure to register more than one character string in the master data.
7
Touch [Verif. master data] and select the character string in the master data to use for verifica-
tion.
On FQ2-S4 Series, you can set the [Item ref.] verification condition to check if characters that are printed near a bar-
code or 2D code match the contents of the barcode or 2D code.
Place the inspection item to read the barcode or 2D code to check before the OCR inspection item and then specify
the [Item ref.] verification condition for the OCR inspection item. The verification condition will be used to verify
whether the character string from the barcode or 2D code and the characters printed below it match.
You can output the verification result.
You can automatically register the read result from teaching from an external device in the character string with number that
is specified [External teach No.] in the master data.
8
Touch [Back].
Parameter
Setting
Description
Matching mode
• Direct Input (Default)
• Calender Matching
• Code Matching
Select your attempted Matching mode.
Verif. master data
• OFF (Default)
• All master data
Master data 0 to 31
Sets whether to verify the read character string against a charac-
ter string that is registered in the master data.
To verify the read character string against the master data, select
the character string to use for verification.
Master data regist.
---
Registers a character string in the master data.
Use [Manual] menu when making a change to the [Partial Verifi-
cation] setting for master data originally registered by [Auto].
External teach No..
(Only the Direct Input is selected.)
• OFF (Default)
Master data 0 to 31
Sets the character string in which to automatically register the
read result for teaching from an external device.
Note
Read result: 0112345678901231 (Read with the [0.Bar code] inspection item.)
Read with [1.OCR] inspection item.
The verification condition is set to [0.Bar code].
Barcode character string: 0112345678901231
Reference data setting: Item 0
Verification range for line 1: 1 to 16 (0112345678901231)
Barcode
Printed characters
Note
Summary of Contents for FQ2-S/CH Series
