Omron FQ2-S/CH Series, User Manual, Page: 287 / 590

Inspecting with the Edge Width Inspection Item FQ2-S/CH User’s Manual
285
4
Setting Up Inspect
ions
Changing Edge Detection Conditions (Sensors with Monochrome Cameras Only)
You can change the measurement conditions for Sensors with Monochrome Cameras.
Change the [Density change] and [Measurement method] parameters.
p. 275
Reflect in Total Judgment
You can specify whether to reflect the judgment results of an inspection item in the overall judgment.
The Default is to reflect them.
[Inspect]
−
[Inspection]
−
[Add item.]
−
[Edge Width]
−
[Details] Tab Page
−
[Output parameter]
Unstable Edge Width Results (Sensors with Color Cameras)
If the measurement result is not stable, adjust the [Edge level], [Noise level], and [Set color.] parameters.
p. 276
Increasing Edge Width Processing Speed
Make the measurement region smaller to reduce the processing time.
Changing the measurement region: p. 227