Omron FQ2-S/CH Series, User Manual, Page: 354 / 590

Starting Operation
352
FQ2-S/CH User’s Manual
6-1 Starting Operation
FQ2-S1 FQ2-S2 FQ2-S3 FQ2-S4 FQ2-CH
When test measurements and adjustments in Setup Mode have been finished, change to Run Mode and begin
actual measurements. In Run Mode, the Sensor operates stand-alone and outputs the measurement judgment
results on the I/O lines accordingly to the settings. If the Touch Finder or the PC Tool is connected via network
to the Sensor, the operation of the Sensor can be monitored in the following ways.
Run Mode Display
The present display
name.
Overall judgement
Measurement processing time
The time taken from when an
image is input until all
measurements have been
completed.
Inspection results can be
displayed in six formats, such
as in a list or as a trend graph.
These buttons are
displayed both in Setup
and Run Mode.
Sub-menu
Tool Button
Selected inspection item
Connected
Sensor name
Used to select the
detection information to
display when more
than one detection
point is detected at the
same time for one item.
(FQ2-S series only)
Currently selected
scene number,
scene name
p. 354
p. 30