Configuring the Run Mode Display
356
FQ2-S/CH User’s Manual
Specifying the Startup Run Mode Display
The display that appears when power supply is turned ON can be set. The Default setting is [Gr
Details]. This only appears when [Start screen type] under [Startup display] is set to [Single sensor].
(Setup Mode or Run Mode)
−
[TF settings]
−
[Startup display]
−
[Display pattern]
Displaying the Inspection Item Results
You can scroll though the measurement results of all the configured inspection items by using the following
operations.
• You can set the scene to be displayed when the power supply is turned ON.
Setting the Startup Scene: p. 368
• The Default display setting for startup can be changed.
Selecting the Display When More Than One Sensor Is Connected: p. 389
The following are also displayed in addition to the measurement results for each inspection item.
• Filter item: The results of a filter item is displayed.
• Camera input: The image that is being measured is displayed.
• Position comp.: The result of position compensation is displayed.
• All Region: The measurement regions for all inspection items are displayed.
• Calculation: The calculation result of each expression registered in the inspection settings is displayed.
Note
Switches to the next
inspection item.
Switches to the previous inspection item.
Note
Summary of Contents for FQ2-S/CH Series
