manualshive.com logo in svg

Omron FQ2-S/CH Series, User Manual, Page: 357 / 590

Share
Download
Omron FQ2-S/CH Series User Manual Download Page 357

Configuring the Run Mode Display

FQ2-S/CH User’s Manual

355

 6 

Operatio

n

The following displays are convenient if more than one Sensor is connected.

 

 (Run Mode) 

−

 [Sensor monitor]

When multiple sensors are connected, switching from [Sensor monitor] to [Single Sensor], [Multi sensor], or
[NG sensor] is possible.

Multi sensor

NG sensor

Displays the measurement results of
all connected Sensors.
Green display: OK, Red display: NG

Automatically changes to the display for
any Sensor with an NG result. 

Summary of Contents for FQ2-S/CH Series















































































































































































































































































































































































































































































































































































































Reviews:

No comments