Home
/
Omron
/
FQ2-S/CH Series
/
User Manual

Omron FQ2-S/CH Series, User Manual, Page: 436 / 590

Share

Page: 436 / 590

Omron FQ2-S/CH Series User Manual Download Page 436

Error Messages

434

FQ2-S/CH User’s Manual

8-2 Error Messages

FQ2-S1

FQ2-S2

FQ2-S3

FQ2-S4

FQ2-CH

If an error occurs while making settings on the PC Tool or the Touch Finder, an error message will appear on
the display.
For these errors, the ERR indicator on the Sensor will not light, the ERROR signal will not be output, and the
error will not be recorded in the error history.
Follow the instructions that are given in the error message.

If the following messages appear, the hardware may be faulty.
Contact your OMRON representative.

• System error.
• Application system error. Please reboot.
• Failed to startup.

«
...
434
435
436
437
438
...
»

Summary of Contents for FQ2-S/CH Series















































































































































































































































































































































































































































































































































































































Reviews:

No comments