Omron FQ2-S/CH Series, User Manual, Page: 251 / 590

Inspecting with the Shape Search II Inspection Item FQ2-S/CH User’s Manual
249
4
Setting Up Inspect
ions
Step 2 Teaching
Teaching means to store the region and partial image as reference data for the measurement.
[Inspect]
− [Inspection]
− [Add item.] − [Shape Search II] − [Settings] Tab Page
The following data is stored as the measurement reference.
1
Press [Teach].
2
Place the object that is to be used as the measurement reference in front of the camera.
3
Move the rectangle to the location to be measured.
4
Press [OK].
5
Press [TEACH] on the lower right of the display.
The basic settings will be registered when teaching has been completed.
6
Press [Back] to end teaching.
Item Parameter Description
Reference data
Model image This is the partial image that is stored as the reference.
Reference position X These are coordinates of the model image that are stored as ref-
erence.
Reference position Y
Reference Angle The angle of the registered model.
Drag a corner to
size the rectangle.
Drag the rectangle
to move it.