Omron FQ2-S/CH Series, User Manual, Page: 391 / 590

Connecting to More Than One Sensor FQ2-S/CH User’s Manual
389
7
Conven
ien
t Fu
ncti
ons
Selecting the Display When More Than One Sensor Is Connected
Selecting the Display When More Than One Sensor Is Connected
You can select the display to appear on the Touch Finder when more than one Sensor is connected.
(Setup Mode or Run Mode) − [TF Settings] − [Startup display] − [Startup screen type]
1
Select one of the following display types.
Display type Description
Multi Sensor
Simultaneously displays the images from up to eight detected Sensors.
The display positions for Sensors that are not connected will remain blank.
The Sensors are connected in the order that they are detected.
You can change the display positions of the Sensors.
Specifying Sensor Display Positions for Multiple Sensors ([Multi Sensor] or
[Auto] Only): p. 390
If there are more than eight Sensors that can be connected, select the Sensors to con-
nect from the list of Sensors
Selecting the Sensors to Connect: p. 388
Register the Sensor to connect to display a specific Sensor.
Registering the Sensors to Connect: p. 387
NG sensor Of the connected Sensors, displays the image from the Sensor that most recently had an
NG result.
Single sensor
Displays the image from only one Sensor.
Of the Sensors, the image from only the Sensor that is specified in [Sensor selection] is
displayed.
If a Sensor is not specified in [Sensor selection], the image from the first Sensor that is
detected will be displayed.
Specifying the Sensors to Connect Continuously: p. 417
Auto (Default)
Automatically adjusts the display according to the number of Sensors that are detected.
If more than one Sensor is detected, the images from up to eight Sensors are displayed
at the same time.
If eight Sensors are connected, the display is the same as that for [Multi sensor].