Omron FQ2-S/CH Series, User Manual, Page: 321 / 590

Inspecting with the Labeling Inspection Item FQ2-S/CH User’s Manual
319
4
Setting Up Inspect
ions
Sorting Extracted Labels
Set the sort condition and count for extracted labels. You can set the sort condition and the maximum number
of detections for detection results.
[Inspect] −
[Inspection]
− [Labeling] − [Modify] − [Details] Tab Page − [Meas. Parameter]
Reflect in Total Judgement
You can specify whether to reflect the judgment results of an inspection item in the overall judgment.
The Default is to reflect them.
[Inspect] − [Inspection] − [Add item.] − [Labeling] − [Details] Tab Page − [Output parameter]
1
Press [Sorting method].
2
Select the sorting method.
Parameter Setting Description
Sorting
method
Area ascending order
Area descending order (Default)
Pos. X ascending order
(ascending order of X coordinate)
Pos. X descending order
(descending order of X coordinate)
Pos. Y ascending order
(ascending order of Y coordinate)
Pos. Y descending order
(descending order of Y coordinate)
Set the condition to use for label number
reassignment. When sorting by X or Y coor-
dinates, the upperleft corner is the origin.