Omron FQ2-S/CH Series, User Manual, Page: 553 / 590

Specifications and Dimensions FQ2-S/CH User’s Manual
551
Appe
ndi
ce
s
9
I/O specifi-
cations Input signals 7 signals
• Single measurement input (TRIG)
• Control command input (IN0 to IN5)
Output signals 3 signals
• Control output (BUSY)
• Overall judgement output (OR)
• Error output (ERROR)
Note: The assignments of the three output signals (OUT0 to OUT2) can also be changed
to the following.
・ READY
・ RUN
・ STG (Strobe trigger)
・ OR (Item0 judgment) to OR31 (Item31 judgment)
・ Exp.0 judgment to Exp.31 judgment
Ethernet specifi-
cations 100Base-TX/10Base-T
Communica-
tions Ethernet TCP no-protocol,
Ethernet UDP no-protocol,
Ethernet FINS/TCP no-protocol,
EtherNet/IP,
PLC Link, or
PROFINET
I/O expansion Possible by connecting FQ-SDU1

Sensor Data Unit.
11 inputs and 32 outputs
RS-232C Possible by connecting FQ-SDU2

Sensor Data Unit
.
.
Input specifica-
tions Refer to Table 2.
Output specifi-
cations
Connection
method Special connector cables
Power supply and I/O: 1 cable
(FQ-WD

)
Touch Finder and computer: 1
cable (FQ-WN

)
Special connector cables
Power supply I/O and Sensor Data Unit
.
s: 1 cable (FQ-WD

and
FQ-WU

)
Touch Finder and computer: 1 cable (FQ-WN

)
Indications BUSY indicator (BUSY, green), Judgement result indicator (OR, orange), error indicator (ERROR, red),
Ethernet communications indicator (ETN, orange)
Note: The assignment of the BUSY indicator can be changed to a RUN indicator (display color: green).
Ratings Power supply
voltage 21.6 to 26.4 VDC (including ripple)
Insulation resis-
tance Between all lead wires and case: 0.5 M
Ω
(at 250 V)
Current con-
sumption 2.4 A max. 0.3 A max.
Item Inspection and ID models
Model NPN FQ2-S40

FQ2-
S40

-M
FQ2-
S40

-08
FQ2-
S40

-08M
FQ2-S40-13 FQ2-S40-
13M
PNP FQ2-S45

FQ2-
S45

-M
FQ2-
S45

08
FQ2-
S45

-08M
FQ2-S45-13 FQ2-S45-
13M