![background image](http://html1.mh-extra.com/html/nec/univerge-sv9100/univerge-sv9100_hardware-manual_3936970064.webp)
Issue 1.2
UNIVERGE SV9100
2 - 24
SV9100 System Specifications
Clock: 266 MHz
Interface Blade: 8- or 16-bit microprocessor
Optional Blades: 16- or 32-bit microprocessor
Multiline Terminal (TDM): 8-bit microprocessor
Multiline Terminal (IP): 32-bit microprocessor
IP Adapter: 32-bit microprocessor
Attendant Console: 4-bit microprocessor
SLT Adapter: 4-bit microprocessor
5.6
Dialing Specifications
5.6.1
Dial Pulse Address Signaling
Dial Pulse Address Signaling uses dial pulses (regular momentary
interruptions) to signal the equipment. The following Dial Pulse
specifications are used In the UNIVERGE SV9100 system.
Pulse Rate: 10 ± 0.5 pps/20 ± 1.0 pps
Percent Break: 60 ± 1.5%
Interdigit Interval: 0 pps/20 pps 770 ms. ~ 830 ms.
5.6.2
Dual-Tone Multifrequency (DTMF) Address Signaling
DTMF signaling includes push button or Touchtone dialing. When a
key on a telephone is pushed, two tones (one high frequency and
one low frequency) are provided. In the UNIVERGE SV9100 system,
the following DTMF specifications are used.
Frequencies
Two sinusoidal frequencies are provided, one from the high frequency
group and one from the low frequency group.
Frequency Deviation: Less than ±1.5%
Signal Level:
Nominal level per frequency: -6 ~ -4 dBm
Minimum level per frequency
Low Group: -10 dBm
High Group: -8 dBm
Maximum level per frequency: 0 dBm
Rise Time: Within 5 ms.
Duration of Dual Frequency Signal:
110 ms. default/60 ms. minimum
Summary of Contents for Univerge SV9100
