![background image](http://html1.mh-extra.com/html/nec/univerge-sv9100/univerge-sv9100_hardware-manual_3936970187.webp)
UNIVERGE SV9100
Issue 1.2
System Hardware Manual
4 - 33
ADP adapters)
These ports provide -48V feeding.
Two blade status LEDs – One Live LED, One Busy/Idle LED
Table 4-13 GCD-8DLCA/GCD-16DLCA Maximum Upgrade
Capacities
provides the maximum capacities for the ESIU blades
when they are upgraded.
4.1.2
Installation
The GCD-8DLCA/GCD-16DLCA blades can be installed in any
universal slot in the system and up to a maximum of 20 DLCA blades
can be installed per system, providing up to 368 digital ports.
To install the GPZ-8DLCB
/
GCD-16DLCA:
1.
If installing the GCD-8DLCA and the GPZ-8DLCB daughter
board is to be attached, do so now. Refer to
4.2.2 Installation
on page 4-38
.
2.
Each CNx01 connector (CN101, CN201, CN301, CN401) is
used to connect up to four digital extensions.
4.1.3
LED Indications
LEDs for the GCD-8DLCA
/
GCD-16DLCA are described in
Table 4-
14 GCD-8DLCA/GCD-16DLCA LED Indications
. Each LED is listed
with its associated function and LED and Operational status. Refer
to
Figure 4-9 GCD-8DLCA/GCD-16DLCA/ Blade
and
for the
location of the LEDs on the blades.
Table 4-13 GCD-8DLCA/GCD-16DLCA Maximum Upgrade Capacities
ESIU
19”
Chassis
with CPU
19” Chassis
without CPU
19” Chassis
x4
Networked
Chassis
GCD-8DLCA
5
6
23
32
GCD-16DLCA
5
5
20
32
Table 4-14 GCD-8DLCA/GCD-16DLCA LED Indications
LED Indication
Operation Status
Remarks
Live LED
(Green)
Busy LED
(Red)
On
On
System Initializing
–
Summary of Contents for Univerge SV9100
