![background image](http://html1.mh-extra.com/html/nec/univerge-sv9100/univerge-sv9100_hardware-manual_3936970250.webp)
Issue 1.2
UNIVERGE SV9100
4 - 96
Installing the SV9100 Blades
6.3
GCD-RGA (Application Gateway)
6.3.1
Description
The GCD-RGA blade is a 4-port switch and router which complies with the
Ethernet specification for 10 Base-T, 100 Base-TX and 1000 Base-TX. This
blade is compatible in LAN applications using 10Mbps, 100Mbps and
1000Mbs. All ports automatically identify and switch 10 Base-T, 100
Base-TX, 1000 Base-TX and Full/Half-Duplex.
Each GCD-RGA blade comes with a built-in router application that provides
the following features:
p
VoIP Gateway
p
WAN Router:
DHCP
PPPoE
Static IP
p
Dynamic DNS
p
Virtual Private Network (VPN)
Figure 4-34 GCD-RGA Blade
WAN
LAN
USB
Reset
Busy LED
Active LED
Summary of Contents for Univerge SV9100
