![background image](http://html1.mh-extra.com/html/nec/univerge-sv9100/univerge-sv9100_hardware-manual_3936970446.webp)
Issue 1.2
UNIVERGE SV9100
6 - 34
Installing SV9100 Optional Equipment
11.3.1
ADA-L UNIT Switch Settings
Figure 6-23 ADA-L UNIT
shows the location of the switches. The dip
switches (DSW) allow a technician to configure the unit for specific
settings.
To provide control to the recorder or to enable/disable the record start warning
tones, refer to
Table 6-3 ADA-L Unit Switch Settings
.
Figure 6-23 ADA-L UNIT
Table 6-3 ADA-L Unit Switch Settings
Switch
Description/Settings
SW1
SW1-1
Connects to Multiline Terminal
Connect = Default
SW1-2
Not Used
SW2
SW2-1
Sets External Equipment Impedance to 600
Ω
SW2-2
Used for Complex Impedance Devices
(< 30
Ω
Input Impedance)
Due to location, set switches prior to installation of
ADA-L on DT Series multiline terminal.
Summary of Contents for Univerge SV9100
