![background image](http://html1.mh-extra.com/html/nec/univerge-sv9100/univerge-sv9100_hardware-manual_3936970319.webp)
UNIVERGE SV9100
Issue 1.2
System Hardware Manual
5 - 59
4.7.1
Installing the Numbered Keypad on a Multiline Terminal
1.
Remove the plastic panels. (Refer to paragraph
Figure 5-51
Remove Plastic Panels
.)
2.
Pull down on the tab and lift the Numbered Keypad away from
the telephone to remove the existing button. See
Figure 5-52
Removing Numbered Keypad from DT300/DT700 Series
Terminal
.
Figure 5-51 Remove Plastic Panels
Figure 5-52
Removing Numbered Keypad from DT300/DT700
Series Terminal
To prevent possible damage to the Numbered
Keypad or the DTL/ITL multiline terminal during
installation or removal, disconnect the line cord/
LAN cable and the AC/DC adapter from the DTL/
ITL multiline terminal.
Line Key
Panel
Numbered
Keypad
Panel
Desi Printer
Sheet
Summary of Contents for Univerge SV9100
