![background image](http://html1.mh-extra.com/html/nec/univerge-sv9100/univerge-sv9100_hardware-manual_3936970353.webp)
UNIVERGE SV9100
Issue 1.2
System Hardware Manual
5 - 93
.
Right and Left side panels are not interchangeable.
5.2.8
WM-L UNIT Attached to Wall
The WM-L UNIT (Wall Mount Unit) is used to attach any DT Series
multiline terminal to the wall. This unit connects to the back side of
the telephone.
When optional adapters are used, the multiline terminal must be
installed on the wall using the WM-L UNIT.
1.
Plug line cord in the wall receptacle. Leave about eight inches
of cord and bundle the rest.
2.
Feed the line cord through the opening in the WM-L UNIT.
3.
Attach the WM-L UNIT to the wall using four screws (refer to
Figure 5-99 Attach the WM-L UNIT to Wall
).
4.
Align the four cutouts with the four tabs on the WM-L UNIT
Figure 5-98 PANEL( )-L UNIT
Figure 5-99 Attach the WM-L UNIT to Wall
Screws
Screws
Summary of Contents for Univerge SV9100
