![background image](http://html1.mh-extra.com/html/nec/univerge-sv9100/univerge-sv9100_hardware-manual_3936970202.webp)
Issue 1.2
UNIVERGE SV9100
4 - 48
Installing the SV9100 Blades
4.4.3
Connectors
Table 4-23 GPZ-4LCA/GPZ-8LCE/ RJ-61 Cable Connector Pin-Outs
show the pin-outs for the RJ-61 connector. Refer to
Figure 4-12
Installing the GPZ-4LCA Daughter Board on page 4-45
for
illustrations showing the location of the connectors on the SLIDB
blades.
Table 4-23
GPZ-4LCA/GPZ-8LCE/ RJ-61 Cable Connector Pin-Outs
RJ-61 Cable Connector –
48SLIDB – CN2 (ports 9~12)
8SLIDB – CN2 (ports 9~12), CN3 (ports 13~16)
Pin No.
Connection
1
T4 (Tip for port 4)
2
T3 (Tip for port 3)
3
T2 (Tip for port 2)
4
R1 (Ring for port 1)
5
T1 (Tip for port 1)
6
R2 (Ring for port 2)
7
R3 (Ring for port 3)
8
R4 (Ring for port 4)
Summary of Contents for Univerge SV9100
