![background image](http://html1.mh-extra.com/html/nec/univerge-sv9100/univerge-sv9100_hardware-manual_3936970205.webp)
UNIVERGE SV9100
Issue 1.2
System Hardware Manual
4 - 51
4.5.3
LED Indications
LED indications for the GCD-LTA are indicated in
Table 4-24
GCD-LTA LED Indications
. Each LED is listed with its associated
function and LED and Operational status. Refer to
Figure 4-13
GCD-LTA Blade on page 4-49
for the location of the LEDs on the
blade.
Table 4-24 GCD-LTA LED Indications
LED Indication
Operation Status
Remarks
Live LED
(Green)
Busy LED
(Red)
On
On
System Initializing
–
Flash (1s)
On
The assignment of the unit is refused.
When you exceed the system
capacity.
When the main software
version is not matched.
Flash (1s)
Trouble found during self-diagnostics.
–
Flash
(100ms)
On
Normal
Operation
A Channel is busy (use
another from CH1 ~ CHx).
–
Off
All channels are idle.
–
Off
On
Unit Busy
A Channel is busy (use
another from CH1 ~ CHx).
–
Off
All channels are idle.
–
Flash (100ms
On/Off)
Downloading firmware.
–
Summary of Contents for Univerge SV9100
