![background image](http://html1.mh-extra.com/html/nec/univerge-sv9100/univerge-sv9100_hardware-manual_3936970213.webp)
UNIVERGE SV9100
Issue 1.2
System Hardware Manual
4 - 59
5.2.2
Installation
To install the GPZ-4COTE
:
1.
Four plastic spacers are included with the COIDB. Install the
plastic spacers on the GCD-4COTA or GCD-LTA blade. Make
sure to attach the spacers so that they extend out on the side of
the daughter board which has the CN1 connector.
2.
Position the GPZ-4COTE CN1 connector over the CN4
connector on the GCD-4COTA or GCD-LTA. Press the blades
together, ensuring the plastic spacers lock in place.
3.
Install the GPZ-4COTE blade (refer to
Figure 4-15 Installing
the GPZ-4COTE Daughter Board on page 4-57
).
5.2.3
Connectors
Table 4-30 GPZ-4COTE RJ-61 Cable Connector Pin-Outs on page
4-59
shows the pin-outs for the RJ-61 connector. Refer to
Figure
4-15 Installing the GPZ-4COTE Daughter Board on page 4-57
for an
illustration showing the location of the connectors on the
GPZ-4COTE blades.
Table 4-30 GPZ-4COTE RJ-61 Cable Connector Pin-Outs
RJ-61 Cable Connector
CN2, Trunks – Connecting to COIU Blade
The CN2 connector is
polarity sensitive
(tip-to-tip, ring-to-ring).
Pin No.
Connection
1
Circuit 8 – Tip
2
Circuit 7 – Tip
3
Circuit 6 – Tip
4
Circuit 5 – Ring
5
Circuit 5 – Tip
6
Circuit 6 – Ring
7
Circuit 7 – Ring
8
Circuit 8 – Ring
Summary of Contents for Univerge SV9100
