![background image](http://html1.mh-extra.com/html/nec/univerge-sv9100/univerge-sv9100_hardware-manual_3936970183.webp)
UNIVERGE SV9100
Issue 1.2
System Hardware Manual
4 - 29
and Operational status. Refer to
Figure 4-4 GCD-CP10 Blade with
Daughter Boards Installed on page 4-17
for the location of the LEDs
on the blades.
The following table shows the LED indication when transmitting or
receiving data on CN1
Table 4-11 IPLA Daughter Board LED Indications
LED
Function
LED Status
Operation Status
Link 10
(D103)
10Base-T link speed
indicator
On Red
10Base-TX link up
LINK 100
(D102)
100Base-T link speed
indicator
On Red
100Base-T link up
LINK 1000
(D101)
1000Base-T link speed
indicator
On Red
1000Base-T link up
ACT
(D100)
Link activity or data
transmission and reception
On Green
LED lights when link up
completed. LED flashes
when data is transmitting or
receiving.
Table 4-12 IPLE Daughter Board LED CN1 Transmit/Receive Data Indications
LED
Operation Status
ACT
Link1000
Link100
Link10
Off
Off
Flash
Flash
Internal Error (Hardware Error)
Off
On
Flash
Flash
On
On
Flash
Flash
On
Off
Flash
Flash
State of half-duplex transmission (Not
supported) Change HUB etc. to
full-duplex transmission.
Flash
Blinking one by one
The firmware is being updated.
.
The IPLE only supports full-duplex transmission.
Summary of Contents for Univerge SV9100
