![background image](http://html1.mh-extra.com/html/nec/univerge-sv9100/univerge-sv9100_hardware-manual_3936970449.webp)
UNIVERGE SV9100
Issue 1.2
System Hardware Manual
6 - 37
11.3.3
ADA-L UNIT Connection
11.3.3.1
ADA-L UNIT Connection for Recording Only
1.
Set the ADA-L UNIT DSW switches (Refer to
Figure
6-23 ADA-L UNIT on page 6-34
).
2.
Using the mini-plug connection cord, connect the
the ADA-L Unit Out jack to the cassette recorder
MIC jack (Refer to
Figure 6-27 ADA-L OUT Jack
Connection
).
Figure 6-27 ADA-L OUT Jack Connection
The mini-plug connection cord should not use an
attenuator and have a monaural (single ring)
mini-plug connection for normal recording.
Set DSW 6 to ON.
When using the LINE IN jack
on a cassette recorder for
recording, set DSW switch 5 to
OFF.
When using the MIC jack on a
cassette recorder, set DSW
switch 5 to ON.
Summary of Contents for Univerge SV9100
