![background image](http://html1.mh-extra.com/html/nec/univerge-sv9100/univerge-sv9100_hardware-manual_3936970402.webp)
Issue 1.2
UNIVERGE SV9100
5 - 142
Installing DT Series Digital and IP Multiline Terminals
10.11 Wall Mounting the Charging Unit
The charging unit is also designed to be wall mounted. Before mounting the
charging unit, consider the following:
m
Select a location away from electrical cables, pipes, or other items behind
the mounting location that could cause a hazard when inserting screws into
the wall.
m
Make sure the wall material can support the weight of the charging unit.
m
Use #10 screws with anchoring devices suitable for the wall material where
the charging unit will be placed.
To mount the charging unit:
1.
Insert two mounting screws one inch apart. Allow about 3/16 of an inch
between the wall and screw heads for mounting the telephone.
2.
Plug the AC adapter into the charging unit. Wrap the AC adapter cord
around the strain relief.
Figure 5-163 Inserting Screws for Wall Mounting
Figure 5-164 Wrapping the AC Adapter Cord Around the Strain Relief
Summary of Contents for Univerge SV9100
