![background image](http://html1.mh-extra.com/html/nec/univerge-sv9100/univerge-sv9100_hardware-manual_3936970331.webp)
UNIVERGE SV9100
Issue 1.2
System Hardware Manual
5 - 71
4.12.1.2
Wall Mounting the Multiline Terminal
1.
Plug line cord in the wall receptacle. Leave about
eight inches of cord and bundle the rest as shown in
Figure 5-66 Bundling the Line Cord
.
2.
Ensure the Tilt Legs are in the flat (unused
position).
3.
Plug the line cord into the Multiline Terminal as
illustrated in
Figure 5-67 Plugging in Line Cord
.
4.
Align the two holes on the back of the multiline
terminal with the two screws on the wall plate and
slide downward (refer to
Figure 5-68 Mount Multiline
Terminal Wall on Wall Plate on page 5-72
).
Figure 5-66 Bundling the Line Cord
Figure 5-67 Plugging in Line Cord
Line In
Summary of Contents for Univerge SV9100
