![background image](http://html1.mh-extra.com/html/nec/univerge-sv9100/univerge-sv9100_hardware-manual_3936970196.webp)
Issue 1.2
UNIVERGE SV9100
4 - 42
Installing the SV9100 Blades
4.3.2
Installation
Install the GCD-4LCA
/
GCD-8LCA blade into any available universal
slot.
.
If the GPZ-4LCA/GPZ-8LCE is used, install this prior to inserting the
GCD-8LCA into the chassis
4.3.3
LED Indications
LED indications for the GCD-4LCA
/
GCD-8LCA are listed in
Table 4-
20 GCD-4LCA/GCD-8LCA LED Indications
. Each LED is listed with
its associated function and LED and Operational status. Refer to
Figure 4-11 GCD-4LCA/GCD-8LCA Blade on page 4-40
for the
location of the LEDs on the blades.
When connecting a fax machine or analog
modem, make sure to set Program 15-03-03 to
1 (special terminal) to avoid communication
problems.
The SLIU and SLIDB are categorized as
TNV2. With this designation, off-premise
wiring is not acceptable. Any cabling to the
SLIU blade must be within the building – no
outside cabling is permitted.
Branch connection is not acceptable.
Table 4-20 GCD-4LCA/GCD-8LCA LED Indications
LED Indication
Operation Status
Remarks
Live LED
(Green)
Busy LED
(Red)
On
On
System Initializing
–
Flash (1s)
On
The assignment of the unit is refused.
When you exceed the system
capacity.
When the main software
version is not matched.
Flash (1s)
Trouble found during self-diagnostics.
–
Flash
(100ms)
On
Normal
Operation
A Channel is busy (use
another from CH1 ~ CHx).
–
Off
All channels are idle.
–
Summary of Contents for Univerge SV9100
