![background image](http://html1.mh-extra.com/html/nec/univerge-sv9100/univerge-sv9100_hardware-manual_3936970308.webp)
Issue 1.2
UNIVERGE SV9100
5 - 48
Installing DT Series Digital and IP Multiline Terminals
4.3
Connecting the DT700/DT800 Series IP Multiline Terminal to the
Network and PC
These instructions for connecting an IP Multiline Terminal to the Network and
PC apply to DT700/DT800 series Multiline Terminals. Refer to
Figure 5-37 IP
Terminal Connector Locations
.
1.
Connect the LAN Network
10Base-T/100Base-TX
cable to the LAN (=)
connector.
2.
The IP terminal has a switching HUB to connect a PC to the LAN
Network. Connect the 10 Base-T/100 Base-TX straight cable used for
this connection to the PC(x) connector and to the PC.
Refer to
Figure 5-38 Typical Network IP Connection on page 5-49
.
Figure 5-37 IP Terminal Connector Locations
LAN (=) PC(x)
Connections
Summary of Contents for Univerge SV9100
