![background image](http://html1.mh-extra.com/html/nec/univerge-sv9100/univerge-sv9100_hardware-manual_3936970233.webp)
UNIVERGE SV9100
Issue 1.2
System Hardware Manual
4 - 79
Table 4-43 GCD-PRTA RJ48C Connector Pin-outs
shows the pin-
outs for the 8-pin RJ48C connector for the network and terminal
interfaces.
Table 4-43 GCD-PRTA RJ48C Connector Pin-outs
Network Interface
Pinout for the 8-Pin
RJ48C Connector
Terminal Interface
Pinout for the 8-Pin
RJ48C Connector
Pin
No.
Connection
For connection
to T1 network:
Use AT&T Type
ABAM cable or
equivalent
(individually-
shielded twisted
pair, rated at
100 ohms at 1
MHz).
Pin
No.
Connection
1
RxD (R1)
1
RxD (R)
2
RxD (T1)
2
RxD (T)
4
TxD (R)
4
TxD (R1)
5
TxD (T)
5
TxD (T1)
3, 6
No Connection
3, 6
No Connection
7, 8
No Connection
7, 8
No Connection
Summary of Contents for Univerge SV9100
