![background image](http://html1.mh-extra.com/html/nec/univerge-sv9100/univerge-sv9100_hardware-manual_3936970195.webp)
UNIVERGE SV9100
Issue 1.2
System Hardware Manual
4 - 41
The 4SLIU and 8SLIU are not rated for OPX use. A 4DIOPU blade
should be used instead (it supports the analog DID and single line
telephone interface functions, such as Off-Premise Extensions).
One extension status LED
Two blade status LEDs
Constant current type battery feeding (25mA / -28Vdc)
DC Voltage (On hook) (-28Vdc)
Feeding Polarity Reverse Ability
Connector for GPZ-4LCA/GPZ-8LCE Daughter Boards
Ring Generator (75Vrms, 16Hz/20Hz/25Hz selectable by CM82-04-02)
Caller ID Sending Ability
Message Wait Lamping Ability (110V DC)
Cable length = 600ohms (including the SLT). Approximately 1Km
The GCD-8LCA consumes eight ports ranging between ports
001~256. The CN3 and CN5 connectors each provide connection to
four analog station ports. The CNx connectors are not polarity
sensitive.
Table 4-19 GCD-4LCA/GCD-8LCA Maximum Upgrade Capacities
SLIU
19”
Chassis
with CPU
19” Chassis
without CPU
19” Chassis
x4
Networked
Chassis
GCD-4LCA
5
6
23
32
GCD-8LCA
5
6
23
32
Summary of Contents for Univerge SV9100
