![background image](http://html1.mh-extra.com/html/nec/univerge-sv9100/univerge-sv9100_hardware-manual_3936970434.webp)
Issue 1.2
UNIVERGE SV9100
6 - 22
Installing SV9100 Optional Equipment
11-08-01 : ACI Group Pilot Number
Assign pilot numbers to ACI groups. When a user dials the pilot number,
they reach an available ACI software port within the group.
Aspire S: ACI Groups 1-4
Aspire: ACI Groups 1-16
11-12-50 : Service Code Setup (For Service Access)
Specify the service code to be used for toggling the relay open and closed
(Default: 880).
33-01-01 : ACI Port Type Setup
Set each ACI software port for input (1) or input/output (2). Use input ports
for Music on Hold sources. Use output ports for External Paging/ringer
control.
Aspire S: ACI Ports1-8
Aspire: ACI Ports 1-96
33-02-01 : ACI Department Calling Group
Assign ACI software ports to ACI Department Groups. This lets ACI callers
connect to ACI software ports by dialing the group’s pilot number (set in
Program 11-08).
Aspire S: ACI Ports 1-8, ACI Groups 1-4
Aspire: ACI Ports 1-8, ACI Groups 1-16
ACI Recording
10-07-01 : Conversation Record Circuits
Assign the number of conversation record circuits.
14-09-01 : ACI Conversation Recording Destination for
Trunks – ACI
Recording Destination Extension Number
Use this option to assign the ACI Call Recording destination on a per trunk
basis. The destination can be an ACI port’s extension number (assigned in
Program 11-06-01) or an ACI Department Group pilot number (assigned in
Program 11-08-01). If destinations are assigned in Programs 14-09 and 15-
12, the destination in Program 15-12 will be followed.
14-09-02 : ACI Conversation Recording Destination for Trunks –
ACI Automatic Recording for Incoming Call
Determine whether a trunk should be automatically recorded when an
incoming call is received (0=off, 1=on).
14-09-04 : ACI Conversation Recording Destination for Trunks –
ACI Automatic Recording for Outgoing Call
Determine whether a trunk should be automatically recorded when an
outgoing call is
initiated (0=off, 1=on).
15-07-01 : Programmable Function Keys
If required, program an ACI Conversation Record Key (code 69 + 0). This
key allows an extension user to press the key to manually record a call to
the ACI.
Summary of Contents for Univerge SV9100
