Mitsubishi Electric EZMotion-NC E60 Series, Operation Manual

Page: 77 / 510

2. Monitor
2.5 Resuming the Program
I -62
b) Type B
The main program to be restarted is searched for.
Press the
INPUT
key.
M: MODE <0> MEMORY
<1> TAPE <2> IC CARD
T: TYPE <0> UNMODLE <1> TYPE 1 <2> TYPE 2
<3>T-TYP
O ( ) N ( 0) - ( 0) P
（
3
）
T(2) M(0)
M: MODE <0> MEMORY
<1> TAPE <2> IC CARD
T: TYPE <0> UNMODLE <1> TYPE 1 <2> TYPE 2
<3>T-TYP RESEARCH EXECUTION
O ( ) N ( 0) - ( 0) P
（ ）
T(2) M(0)
[PROGRAM RESTART] MONITOR 5 .1/ 2
O 2000 N 0 - 0
<SUB> O 3000 N 0 - 0
[RESTART- (G54)] [RESTART-R]
X -80.000 X -80.000
Y -40.000 Y -40.000
Z 0.000 Z 0.000
C 0.000 C 0.000
O3000;
N1 G42 G01 X-10. Y-10. D05 F100;
M: MODE <0> MEMORY
<1> TAPE <2> IC CARD
T: TYPE <0> UNMODLE <1> TYPE 1 <2> TYPE 2
<3>T-TYP RESEARCH COMPLETE
O ( ) N ( ) - ( ) P
（ ）
T( ) M( )
The "RESEARCH EXECUTION"
message appears during the search
and upon its completion the
"RESEARCH COMPLETE" message
is displayed.
Assign the block at which machining
is to restart and proceed with the
type 2 search.
O ( ) N ( 0 ) - ( 0 )
P ( 3 ) T ( 2 ) M ( 0 )