Mitsubishi Electric EZMotion-NC E60 Series, Operation Manual

Page: 41 / 510

2. Monitor
2.2 COORDINATE
I -26
2.2 COORDINATE
When the menu key
COORDI
is pressed, the COORDINATE screen is displayed.
POSI COORDI COMMAND SEARCH MENU
[COORDINATE] O12345678 N12345-12 MONITOR2 2.1/2
<SUB>O 1000 N 200-30 Fc 0.00 WORK COUNT 1300/ 30000
N1 G00 X-345.678; [POSITION] [WORK (G54)] [MACHINE]
N2 T1234; X1 100.000 X1 100.000 X1 100.000
N3 S5000 M3; Y1 200.000 Y1 200.000 Y1 200.000
N4 G00 Z-100; Z1 300.000 Z1 300.000 Z1 300.000
N5 G01 X100. F500;
N6 Y100.;
N7 G02 X200. R200.;
[DIS TO GO] [NEXT]
SPINDLE 0 50 100 X1 100.000 X1 100.000 S 5000
110% Y1 200.000 Y1 200.000 ( 2000)
Z1 300.000 Z1 300.000
Z-AX 0 50 100
80% T 1234
STP mm ABS G40 G54 MEMORY M 12
Display item Explanation
O12345678 N12345-12 The currently executing program number, sequence number, and
block number are displayed.
<SUB> O 1000 N 200-30 When a subprogram is being executed, the program number,
sequence number, and block number of the subprogram are
displayed.
[POSITION]
X -345.678
Y 345.678
Z 0.000#1
The current position during execution and the status abbreviation of
the axis are displayed.
The status symbol is the same as the display on the POSITION
screen.
Workpiece offset
Machine
zero point
Workpiece
zero point
Relative value (a)
(Machine position)
Displayed by tool reference
position
Workpiece
coordinate
Current value B
Tool reference position
Tool nose position
Relative value (b)
Displayed by tool
nose position
Tool