Mitsubishi Electric EZMotion-NC E60 Series, Operation Manual

Page: 91 / 510

3. Tool Offset (L system)
3.1 Wear Data
I -76
Refer to "3 (II). Tool Offset (M system)" for M system.
3.1 Wear Data
The TOOL TIP OFFSET screen will appear when the menu key
T-OFSET
is pressed.
T-OFSET T-DATA NOSE-R LIFE MENU
[TOOL TIP OFFSET] TOOL 1.1/4
[POSITION] X 0.000
#I :INC. #A :ABS. Z 0.000
# C 0.000
1 X 0.050 Z 0.020 C 0.100
2 X 0.100 Z 0.050 C 0.010
3 X 0.000 Z 0.000 C 0.000
4 X 0.000 Z 0.000 C 0.000
5 X 0.000 Z 0.000 C 0.000
6 X 0.000 Z 0.000 C 0.000
7 X 0.000 Z 0.000 C 0.000
8 X 0.000 Z 0.000 C 0.000
9 X 0.000 Z 0.000 C 0.000
10 X 0.000 Z 0.000 C 0.000
# ( ) X ( ) Z ( ) C ( )
Set the tool nose wear for each tool used. When the tool compensation No. is designated by the tool
command (T command), compensation is carried out matching the tool length of the next screen.
X axis offset
X axis tool length X axis wear offset
Z axis offset
Z axis tool length Z axis wear offset
C axis offset (additional axis)
C axis tool length C axis wear offset
Data Function
X
X axis tool nose wear
compensation
Z
Z axis tool nose wear
compensation
Tool nose
Z axis tool nose wear
compensation amount
X axis tool nose
wear
compensation
amount
Z
X
C
Additional axis tool nose wear
compensation
(Note 1) Whether to apply the tool nose wear compensation of the additional axis on the 3rd axis or 4th axis
can be selected with the parameter (#1520 Tchg34).