8. Maintenance Functions
8.2 Data Sampling
III
-71
(12) #23 VARIABLE NO. (Setting range: 0 to 999)
Set the variable No. that causes the start/end trigger.
0:
System variable (#1299)
Other than 0:
Designated common variable (#100 ~, #500 ~)
(Note 1)
If both #5 and #22 are set to a value other than "1" (variable No.), the value will be ignored
even if set.
(Note 2)
If a number that does not exist is set, "E02 DATA OVER" will occur.
(13) #24 PLC DEVICE
(Setting range: ~ (
∗
) X063F, ~ (
∗
) Y073F)
Set the PLC device that functions as the start/end trigger. If a "
∗
" is added at the head, the device
will be a B contact.
0:
Data sampling trigger signal (Y2FC)
Other than 0:
Designated device
(Note 1)
If both #5 and #22 are set to a value other than "2" (PLC device), the value will be ignored
even if set.
(Note 2)
If a device that does not exist is input, "E01 SETTING ERROR" will occur, and if the
device No. is not within the setting range, "E02 DATA OVER" will occur.
(14) #25 ADDRESS (For simple setup: 0)
Set the address targeted for applying #27 data mask.
However, if an illegal address (highest-order bit 0) is input, a setting error will occur.
If an address that does not exist is set, the system could fail.
(Note)
If both #5 and #22 are set to a value other than "3" or "4" (address conditions, true/false),
the value will be ignored even if set. This item can be set with the same methods as #11 to
#18.
(15) #26 DATA (For simple setup: 0)
Set the data for judging the results of applying #27 data mask on #25 address.
(Note)
If both #5 and #22 are set to a value other than "3" or "4" (address conditions, true/false),
the value will be ignored even if set.
(16) #27 DATA MASK (For simple setup: 0)
Set the data mask to be applied on #25 address.
(Note)
If both #5 and #22 are set to a value other than "3" or "4" (address conditions, true/false),
the value will be ignored even if set.
(17) Example of conditions for ending with address
[Setting details]
#22 E-CONDITION ... "3"
#25 ADDRESS
... "12345678"
#26 DATA
... "00000100"
#27 DATA MASK
... "0000FFFF"
[Meaning of setting details]
The point where results of applying a mask with 0000FFFF onto the data in address 12345678
are 00000100 will function as the sampling end trigger.
Summary of Contents for EZMotion-NC E60 Series
