Mitsubishi Electric EZMotion-NC E60 Series, Operation Manual

Page: 258 / 510

6. Data In/Out
6.3 PROGRAM ERASE
I
-243
(1) To erase one machining program
To erase a specified machining program from the machining programs registered in memory,
perform the following:
1) Program erase is started and the
message "ERASE EXECUTION" is
displayed in the message field. Usually
program erasure is terminated in a
moment.
2) When the erase is complete, the
message "ERASE COMPLETE" is
displayed in the message field and the
data setting area becomes blank.
# ( 1 ) DATA ( 1001
)
ERASE COMPLETE
# ( ) DATA ( )
Press the
INPUT
key.
Set the data type and program
number of the machining program to
be erased.
(Example)
To erase machining program O1001
# ( 1 )
DATA ( 1 0 0 1 )
ERASE EXECUTION
# ( 1 ) DATA ( 1001 )
PROGRAM ENTRY 20 REMAIN 180
CHARACTER 21234 REMAIN 39750
<PROGRAM> <CHR> <ST> <COMMENT>
1 123
2 300
10 222
100 312
1000 125
1001 313
1020 297
PROGRAM ENTRY 19 REMAIN 181
CHARACTER 20921 REMAIN 40250
<PROGRAM> <CHR> <ST> <COMMENT>
1 123
2 300
10 222
100 312
1000 125
1001 313
1020 297
PROGRAM FILE before erase execution PROGRAM FILE after erase execution
Erase
execution
Program O1001 for which the erase function is
executed disappears from the PROGRAM FILE
screen. The new values are displayed in PROGRAM
ENTRY, CHARACTER, and REMAIN.