Mitsubishi Electric EZMotion-NC E60 Series, Operation Manual, Page: 187 / 510

5. Program
5.2 Menu Function
I
-172
(4) Setting the MDI running start position
To start processing with a halfway block after setting MDI data, specify the starting block. First,
set the data according to "Setting MDI Data". At this time, the running start position is set in the
starting block of data. If it is desired to be changed, move the cursor to the head of the block to be
defined as the starting position. Then, press the
INPUT
key.
(Example) When the block containing M02 is desired to be executed.
1) MDI running is enabled, beginning with
the specified block.
2) The specified block is displayed at the top
of the screen head with "MDI SETTING
COMPLET" displayed.
1) The "MDI NO SETTING" status returns.
Press the
INPUT
key.
N 1 G28 X0 Y0 Z0 ;
N 2 G92 X0 Y0 Z0 ;
N 3 G00 X-100.Y-100.;
N 4 G01 X-300.F2000 ;
N 5 Y-300.;
N 6 X-100.;
N 7 Y-100.;
N 8 M02 ;
%
MDI NO SETTING
Move the cursor to the head of the
block to be defined as the starting
position.
N 8 M02 ;
%
MDI
SETTING COMPLET