2. Monitor
2.3 COMMAND
I
-45
(1)
TIME
setting
Set the number, hour, minute, and second corresponding to the TIME to be set.
Set 3 in # ( ).
Set 0 in DATA ( ) ( ) ( )
Press the
INPUT
key.
#3 POWER ON 0: 0: 0
POSI COORDI
COMMAND
SEARCH MENU
# (3)
DATA ( 0 ) ( 0 )
( 0 )
DATE
: Set date (set "YEAR" in last 2 digits of Gregorian calendar)
TIME
: Set time in 24-hour mode.
POWER ON : Total integrating time of the time from control unit power ON to OFF.
AUTO OP
: Total integrating time of the work time from AUTO STL button pressing in the
memory (tape) mode to M02/M30 or reset button pressing.
AUTO STL : Total integrating time during automatic starting from AUTO STL button pressing in
the memory (tape) mode or MDI to feed hold stop, block stop, or reset button
pressing.
EXT TIME 1 : Dependent on PLC sequence.
EXT TIME 2 : Dependent on PLC sequence.
(Note)
Integration time (#3 POWER ON to #7 EXT TIME 2): When display reaches the
maximum value (9999:59:59), integration is stopped and the maximum value remains
displayed.
Summary of Contents for EZMotion-NC E60 Series
