Mitsubishi Electric EZMotion-NC E60 Series, Operation Manual

Page: 134 / 510

3. Tool Offset (M system)
3.2 Tool Registration
I -119
Refer to "3 (I). Tool Offset (L system)" for L system.
3.2.2 Tool Registration in Magazine Pot
OFFSET REGIST LIFE MENU
T 0 M
MG( 1 )
TOOL(
1234
) D(
2
) AUX
( )
Set 1 in MG ( ),
1234 in TOOL ( ), and
2 in D ( ).
Press the
INPUT
key. [T-REGISTRATION] TOOL 2.1/2
HEAD NEXT-1 NEXT-2 NEXT-3 SEARCH
MG TOOL-D MG TOOL-D MG TOOL-D
1 1234-2 11 21
2 12 22
3 13 23
4 14 24
The tool number and data in D are displayed in the specified
magazine number area. The magazine number in setting
area MG ( ) is incremented by one and the data in other
parenthesis pairs disappears.
If a number other than magazine numbers listed in the data
display area is set, the screen is changed to the screen
corresponding to the setup magazine number when the
INPUT
key is first pressed. When the
INPUT
key is pressed again, the
data set in the area is displayed.
(Note) For the functions and purpose of data in D, refer to the
appropriate manual issued by the machine maker.