Mitsubishi Electric EZMotion-NC E60 Series, Operation Manual

Page: 503 / 510

Appendix 6. Operation Messages on Setting and Display Unit
IV
-31
(2) MDI/Editing related
Message Message details
MDI NO SETTING • Only display of MDI data (no execution)
MDI SETTING COMPLETE • The MDI data setting has been completed (execution is now
possible).
MDI ENTRY COMPLETE
• The MDI data was saved in the memory with the specified program
No.
MDI RUNNING • The NC is operating with an MDI program‚ and the MDI data cannot
be corrected.
PUSH KEY SERCH/PROG • Status in which no programs to be edited have been called on the
editing screen. To edit‚ press the SEARCH or PROGRAM edit key.
EDITING
• The details of a program are being edited on the screen. Press INPUT
to write the data in the memory.
PROGRAM RUNNING • A machining program to be edited is currently being run with memory
operation‚ and cannot be edited.
DELETE? (Y/N) • Waiting for a key entry (whether to delete the program) in word edit
status (when the background search menu is selected)
BACK GROUND EDITING • Background edit mode
EDIT POSSIBLE • Editing can be performed in foreground edit mode.
EDIT IMPOSSIBLE • Editing cannot be performed in foreground edit mode.
• This state also occurs during feed hold or fixed cycle mode
(single-block stop).
WORD SEARCH FIN • The word matching the search data was searched on word editing.